Shifter Style:
-CB7: This variant is designed to be be used with the OEM CB7 shifter box (and short throw kit)  Includes hardware for both CB shifter styles.
-RSX OEM/Acuity: This variant is designed to be used with RSX style OEM and Acuity shifter where the right side cable mount opening is vertical.
-RSX K-Tuned: This variant is designed to be used with K-Tuned billet RSX shifter which has the right cable mount opening on the right.  Otherwise the same as the OEM/Acuity cables. (This version doesn't come with shifter side hardware as the K-Tuned has unique hardware.)
 
Chassis Seal:
-None:  You'll only recieve the cables and new hardware for the rod ends.
-Color;  You'll recieve a new BIB chassis seal and cable support bushing, color choice of black, red, and fuscia.
 
Finally bringing my Race Cables to production after a year and a half of positive customer feedback!  I will maintain constinuous stock for the CB Platform, though depending on supplier logistics it may take a few weeks if inventory is empty.
 
Bad Investment Builds Race Cables originated from the lack of aftermarket and OEM cable options for the CB platform.  Even using expensive aftermarket cables from other platforms resulted in less than ideal performance.  We reached out to many push-pull cable manufacturers all over the US about the quality of their products along with US manufactured rod ends to avoid making just another expensive, low quality cable.  Push-pull cables functional requirements are to be stiff, have low friction, and be durable.  The use of stainless and brass components, PTFE on all sliding surfaces, and high quality US based manufacturing ensures quality potential in the product.  BIBs engineering expertise of 14 years in OEM engineering development and manufacturing along with every set being assembled on a purpose built assembly jig specific to each transmission, shifter, and chassis configuration, ensures the highest quality is produced.
 
BIBs Race Cables:
-High quality low friction PTFE lined cable conduit
-All stainless steel fittings and hardware
-Proper rubber seals
-230lb force rating and stiffer than OEM cables
 
Shifter Rod Ends:
-Zinc plated narrow steel rod ends
-Hardened steel ball
-PTFE low friction race liners
-5mm of adjustment
 
Transmission Rod Ends:
-Stainless steel body
-Heat treated stainless ball
-Brass races with PTFE low friction liners
-9mm rod end has an oil embeded bronze inner liner
-5mm of adjustment
 
Cable Bulkhead Adapters:
-Unique bulkheads for each shifter style
-High temperature carbon fiber nylon 3D printed and anealled for optimum material properties
-Continuous opperating temperature of 340F under heavy load
-Cotter pin retention prevents cable from popping off
-Adjustable set screws to adjust for manufacturing tolerances and wear
-5mm of adjustment
 
BIB Race Cable Chassis Seal:
-Polyurethane upper seal similar to the OEM design
-Large pass through holes for BIB race cables
-Carbon fiber PET seal plate with a continuous temp rating of 400F
-Reflective gold thermal tape
-All stainless steel hardware
 
Installation Guide
Please allow for up to a week to ship cables currently in stock.